ZIRO 3D Printer Filament PLA PRO Metal Series 1.75 1KG(2.2lbs), Dimensional Accuracy +/- 0.03mm，Silver

Important Tips:

1. If your 3D printer is an absolutely enclosed printer, please keep the covers open throughout printing to steer clear of a clog. Because an enclosed space will have an effect on the fluidity of PLA material.

2. The GID color means it is going to glow within the darkness. How does it glow? – The glowing characteristic of this filament is: Only when it absorbs light first, then it is going to glow within the darkness. You’ll expose it to bright lighting light for 15-30 mins, then take it to a dark environment, it is going to glow, and the glow effect shall be more obvious for those who try it at night. The entire GID filaments wish to absorb light first, then output glow within the darkness.

3. To steer clear of tangle at first – Please hold the end of the filament while you cut it at first of the use of a new roll, don’t let it scattered disorderly. To resolve it when tangle happened once – Please unwind a couple of meters to verify the filament be sorted out orderly, then restart the printing. Typically, it is going to not happen again. Be sure you insert the free end of the filament into the holes to steer clear of being tangled for next time use.

4. Please store the used filament into the reseal bag (we have now included a free reseal bag in each and every box) to keep it from moisture.

5. If there is not any print plan within a couple of days, retract the filament to give protection to the printer nozzle.

6. When you’ve got a first layer adhesion issue, please check the setting temperature of the warmth bed and re-level the print substrate to cut back the distance between the nozzle and the warmth bed.