, , , ,

SUNLU 3D Printer Filament, SPLA Filament 1.75mm, 1kg Spool(2.2lbs), Dimensional Accuracy +/- 0.02 mm Black


In Stock.

Amazon.com Price: $13.99 (as of 24/07/2021 22:18 PST- Details) & FREE Shipping.

In Stock.

Report Abuse
pla filament 1.75pla filament 1.75
PLA filament 1.75mmPLA filament 1.75mm
3d printer filament3d printer filament

pla filamentpla filament


The Really helpful print setup for SPLA filaments may well be quite different from other filaments; Pls read the outline below, you might also get some practical suggestions through QA/ Most sensible Review from others.

High Transparency and Shiny Bright Color SPLA

SUNLU SPLA filament has Excellent Mechanical Properties, High-Toughnes. High transparency and glossy bright color in comparison to regular PLA, Engineers imagine that the printing characteristics of SPLA are more like PETG. This can be a new form of lightweight plastic.

Devoted to Printing Processes and Industrial Parts, the broadcast product has a smooth surface.

  • Really helpful Extrusion/Nozzle Temp: 230±10°C (436°F-472°F)
  • Heated Bed Temp: 70°C-80°C (158°F-176°F)/ PVP stick is helping
  • Printing Speed:60~80 mm/s (1,800~4,200mm/ min)
  • Filaments Diameter and Accuracy: 1.75 mm +/- 0.02
  • Filaments Net Weight: 1 kg (2.2 lbs)

<a href="javascript:void(0)" data-action="a-expander-toggle" class="a-declarative" data-a-expander-toggle="cannot the filaments stick with the build bed?

1. Check the temperature setting before printing, SPLA filaments have higher extrusion temperature;

2. Check if the plate surface has been used for a longtime, it is strongly recommended to switch it with our new one to verify an strong first layer adhesion ;

3. If the primary layer has poor adhesion, it is strongly recommended to re-level the print substrate to scale back the gap between the nozzle and the outside plate;

4. If the effect isn’t Excellent, it is strongly recommended to check out printing the draft before printing.

5. SPLA is more obvious than PLA wire drawing, and must be wiped clean after printing. SPLA is more suitable for external closed models.

6. Why the broadcast work may be very brittle and does now not stick between layers. SPLA filling increased to 30%-40%, strength and brittleness improved significantly


Based on 0 reviews

0.0 overall

Only logged in customers who have purchased this product may leave a review.

There are no reviews yet.

Vendor Information

  • Store Name: SWIFTGAMES INC
  • Vendor: DocShifty
  • No ratings found yet!