SainSmart PRO-3 PETG Filament is a brand new member of SainSmart 3D printing filament circle of relatives. We use an cutting edge layer-by-layer
spooling process at the same time as manufacturing the PRO-3 Series. This ensures every layer of filament is spooled perfectly!
The filament of the PRO-3 Series is one hundred% tangle-free, with out a overlapping or crossing. The accuracy of PRO-3 is terribly precise
because every inch of filament is measured by laser to make sure it may be printed smoothly. Say good-bye to clogged extruders!
Tolerance Level: ±0.02MM
Print Temperature: 230-260°C / (446-550°F)
Print Speed: 50-100mm/s
Base Plate Temperature: No Heat Required/50-80°C
Bubble: one hundred% Zero Bubbles
Spool Diameter: 7.88″ – Spool Width: 2.64″ – Spool Hub Hole Diameter: 2.10″
Really helpful Storage Temperature : -20 to 50°C / -4 to 122°F
1. SainSmart PETG filament has excellent load capacity and high tensile strength, affect resistance
and is more durable than PLA. It also has no odour which permits simple printing indoors. It doesn’t warp and is recyclable making it better for the surroundings.
It’s a type of new light plastic.
2. SainSmart PETG filament is perfect for so much 3D printers (with print heads which can be suitable for 250°C/482°F), and may also be easily printed
on so much printing substrates, such as glass, Bluetape, and Buildtak.
3. Because of its high layer adhesion and resistance, PETG is optimally suited to manufacturing routinely wired components.
Storage Tips: After every print, we Really helpful storing printer filament in a sealed plastic bag or box to forestall be affected with moisture.
Note(After Use): You should definitely insert the free end of the filament into the opening to keep away from filament being tangled for next time use.