Express your creation with OVERTURE Matte PLA series.
These Matte PLA filaments are developed in line with natural PLA subject material (Polylactic Acid), which boasts complete biodegradation and decrease melting temperature, eco-friendly and secure, and not using a odor all over the printing . Additionally, this Matte PLA filaments is best possible for outputting high quality prints with shine-free color and frosted texture.
Why cannot the filaments keep on with the build bed?
1. Take a look at the temperature environment before printing, PLA filaments have decrease extrusion temperature;
2. Take a look at if the plate surface has been used for a very long time, it is suggested to switch it with our new one to make sure an robust first layer adhesion;
3. If the primary layer has poor adhesion, it is suggested to re-degree the print substrate to scale back the gap between the nozzle and the outside plate;
4. If the impact isn’t just right, it is suggested to take a look at printing the draft before printing.
Recommended Extrusion/Nozzle Temp: 190C – 220C (374 F~ 428 F)
Heated Bed Temp: 50C – 70C (122F ~ 158F)
Filaments Diameter and Accuracy: 1.75 mm +/- 0.05
Printing Speed: 30~70 mm/s (1800mm~4200 mm/min)
Filaments Internet Weight: 1 kg (2.2 lbs)
1 × spool of Matte PLA filaments
1 × build surface