PETG filaments are fabricated from premium PETG plastic which mixes some great benefits of other filaments such as secure and odorless; little shrinkage rate; high affect strength and excellent liquidity (flows smoothly); Furthermore, this gorgeous PETG filaments make prints come out with a bit of “shine” or “spark” to it.
Buy with Confidence, one hundred% Satisfaction Guarantee. E-mail us you probably have any issues or questions, we can make each effort to will give you immediate assist until you might be satisfied.
Why can not the filaments persist with the build bed?
1. Check the temperature setting before printing, PETG filaments have higher extrusion temperature than that of PLA;
2. Check if the plate surface has been used for a very long time, it is strongly recommended to interchange it with our new one to verify a powerful first layer adhesion;
3. If the primary layer has poor adhesion, it is strongly recommended to re-level the print substrate to cut back the gap between the nozzle and the outside plate;
4. If the effect isn’t excellent, it is strongly recommended to take a look at printing the draft before printing.
Recommended Extrusion/Nozzle Temp: 230C – 250C (446F~ 482F)
Heated Bed Temp: 80C – 90C (176F~ 194F)
Filaments Diameter and Accuracy: 1.75 mm +/- 0.05
Filaments Net Weight: 1 kg (2.2 lbs)
Recommended Printing Conditions:
Cooling Fan: Turned on
Printing Speed: 30~50(mm/s)
Raft Separation Distance: 0.14(mm)
Retraction Distance: 1~3 mm
(Note: In accordance with 0.4 mm nozzle and simplify 3D V 4.0.; Printing conditions might vary with different nozzle diameters.)
1 x spool of PETG filaments
1 x build surface