Easily Eliminate Strengthen Structures!
Our recent advancement in 3D printing Subject matter technology is a water-soluble filament designed to enable a very easy removal of the Strengthen structures from any print! PVA filament is designed for use with dual-extruder 3D printers and is simply used to print the Strengthen structures in your 3D print.
A In point of fact Innovative Material
PVA filament is a unique 3D printing Subject matter as a way to dissolve in water thus getting rid of the chance of imperfections caused from casting off Strengthen structures from 3D prints.
Safe & Simple to Use!
Once your print is complete, simply place it in water at room-temperature and the PVA Strengthen structures will start to dissolve. Soon after you’ll be able to be capable of easily peel off the Strengthen structures out of your print avoiding the chance of imperfections from chipped off Strengthen structures.
Don’t let PVA take a seat for your extruder!
PVA can jam your printer in the event you let it take a seat for an extended time period. After use, be sure you properly purge your extruder by feeding about a foot of Fused Materials Cleaning Filament (To be had on Amazon)
Printer Settings: May vary depending in your 3D printer.
– Nozzle Temp: 190 – 220
-Bed Temp: 60 C (beneficial but no longer required)
– Slow print speed 30mm/sec)
-110% float rate
-Fan Settings: Use what works for you when printing with PLA
-Zero Z-gap required. Note that some systems use a default Z-Gap such as Cura
– PVA will have to be kept dry. Don’t store this Subject matter in a humid environment